Home /
H2 Support

H2

User Guide

Download Manual Document

Warranty Status

Check your product warranty

User Guide

Download Manual Document

Warranty Status

Check the warranty of your product

Troubleshooting & Support

Yes. You can connect your external speakers to H2 via HDMI (arc), SPDIF, Bluetooth, or AUX jack (3.5mm).

Was this answer helpful?

Press the 'Power button' on the remote control, then select Speaker mode on the menu to enter Bluetooth Speaker mode.

If the projector is off:

to enter Bluetooth Speaker mode, long-press the "Music" button on the H2 and release it once you hear the fan.

While in Bluetooth Speaker mode, press the 'Play' button on the H2 to enter pairing mode.

Was this answer helpful?

When playing any video, press the menu button on the remote controller---"subtitles/audio track"

Was this answer helpful?

When playing any video, press the menu button on the remote controller -- "play mode" -- "single/cycle"

Was this answer helpful?

1. When playing videos, one-click on the "shortcut" button on XGIMI remote: 3D video setup
2. Choose the corresponding 3D mode
3. When the screen is combined and a blurred picture appears, the 3D setup is completed.
4. Adjust the buttons on the 3D glasses until a clear image is seen through XGIMI 3D glasses
Please make sure the XGIMI 3D glasses is fully charged

Tip: XGIMI 3D glasses is recommended for a better viewing experience.

Was this answer helpful?

Charging time: around 2-3 hours

Power on: Press the power button; A green LED light flash means the glasses have been turned on.

Power off: Long press the power button for 3 seconds; the green LED light will flash 3 times, and the glasses will power off.

Standby status: After 5 seconds without a 3D signal, the glasses will automatically switch to standby mode; the green LED light will also flash every 5 seconds.

USB charging: A red indicator light will appear when the glasses are charging and will automatically shut off once the glasses are fully charged.

Low battery mode: When the 3D glasses are low on battery, the green LED light will flash 5 times, then 2 times every 10 seconds, indicating the need for charging.

To enable the XGIMI 3D glasses:

1. Press once to power them on.

2. Press a second time to adjust the image quality, and continue pressing until the image is clear.

3. When playing videos on your projector, you need to choose the “up/down 3D” or “left/right 3D” effect to ensure an optimized viewing experience.

Was this answer helpful?

Yes.

3D movies, 2D to 3D, and 3D to 2D are all supported.

Was this answer helpful?

For manual focus: Switch the function key on your XGIMI remote control to the right, then use the +/- buttons to manually adjust the focus.

For auto focus:

1- Switch the function key on your XGIMI remote control to the right, and the device will automatically focus the display.

2- Enable ""Auto focus when power on"" and the device will automatically focus once you turn it on."

Was this answer helpful?

The throw ratio describes the distance from the lens to the screen (throw) to the screen width. When the distance from the lens to the screen is the same, the smaller the projection ratio is, the larger the screen can throw.

To adjust H2's projection size, you can physically move the device backwards or forwards.

H2's throw ratio: 1.2:1

Was this answer helpful?

Yes.

Airplay; DLNA for iPhones/iPads XGIMI Assistant; Miracast; DLNA for Android phones/tablets

Was this answer helpful?

Plug in the power source, then press the power button to turn it on.

Press the power button on the device or XGIMI remote control to turn it off.

Was this answer helpful?

Yes. H2 features stepless zooming. You can also adjust it vertically and horizontally to a smaller screen after using stepless zooming.

Was this answer helpful?

Yes. H2 features three keystone correction options.

Intelligent Auxiliary Correction: for auto and manual vertical keystone correction.

Convenient Mode: adjust the image to a regular/default display.

Advanced Keystone Correction: the four corners of the screen can be adjusted up/down/right/left.

Was this answer helpful?

Yes. Please go to "General Settings" - "More Settings" (long-press the ""Left"" button on the XGIMI remote control) - "Fan Speed"

Ensure that the fan speed is set to "Auto".

Was this answer helpful?

Yes. Turn on the hotspot function on the H2, and use your smartphone/tablet to connect to the hotspot signal (AirPlay/Miracast).

Was this answer helpful?

Yes. The XGIMI H2 supports HDR10 decoding.

Was this answer helpful?

Please go to "General Settings"- "More Settings" (long-press the "Left" button on the XGIMI remote control) -"Date and Time".

Was this answer helpful?

1. Please ensure the remote control is within 10 cm of the device.

2. Press the “Return” and “Home” buttons on the remote control simultaneously until the indicator light begins flashing. This means that the remote control has entered pairing mode.

3. When a "Ding" sound is heard, the connection is successful.

Note: If the pairing fails, it will exit after 30 seconds. Please repeat the above steps after it exits.

Was this answer helpful?

1.On/off

2.Air Mouse

3.Menu / Shortcut

4.OK / Directions

5.Return

6.Home

7. Volume+ (Focus+)

8.Volume- (Focus-)

9.Function (at the buttom of remote)

Was this answer helpful?

Yes. The XGIMI Assistant app can control XGIMI projectors. Please follow the instructions below:

Step 1: Download XGIMI Assistant on your smartphone.

Step 2: Ensure your smartphone and projector are using the same WiFi network.Step

3: Open the XGIMI Assistant app on your projector to search for the closest device or scan the QR code on your projector display.

Was this answer helpful?

Yes. You can download apps from the Internet and install them onto your projector via a USB drive:

1. Change the APK suffix to APK.1 on your computer: e.g., change YouTube.apk to YouTube.apk.1

PS: The suffix limitation will be removed soon, eliminating the need to change the suffix.

2. Copy the APK to the root directory of the U-Disk.

3. Connect the USB to your projector:

Go to " File Manager"- "Removable Storage"- "APK".

Then, press "OK"- choose"Others", open with "Package Installer", then "Install".

Was this answer helpful?

Yes. The XGIMI Tech team continuously updates and optimizes product software.
Please contact us for further information if you have any suggestions or feedback at service-usa@xgimi.com.

Was this answer helpful?